Automatic Carbonated Drink Filling Machine , Soda Filling Machine For PET Bottle

Carbonated beverage rising filling capping 3 in 1 machine

Features:

1. This DCGF Wash-filling-capping 3-in-1unit:

2. Beverage Machinery is used to produce Gas beverage (CSD)

3. The DCGF Wash-filling-capping 3-in-1unit:Beverage Machinery can finish all the process such as press bottle, filling and sealing,

4. it can reduce the materials and Outsiders touch time, improve the sanitary conditions, production capacity and economic efficiency.

characteristics:

1). Compact structured, good-looking, easy to operate and highly automated.

2). Air conveyor is directly linked with feed-in starwheels, making it easier to change bottles without screws and conveyor chains.

3). Bottles are transferred in the manner of clamping neck. Bottles can be changed through some replacement of steel clamps, which instead of adjusting the height of machine.

4). Rinser-clamp which special design is strong and endurable, no contact with bottle-mouth, to prevent pollution.

5). Highly effective spraying nozzles equipped on the rinser-clamp can rinse every side of inner bottle and save water.

6). Accessories which contact with material are all made of stainless steel, no dead angles and easy to clean up.

7). Replacement between CO2 and O2 ensure almost no O2 in bottle, long filling pipe reduce O2 content to null

8). Valve on-off system is driven by hydraulic cylinder, which starts on bottle signals.

9). High-speed and highly accurate bottling valves ensure no loss of liquid at high speed.

10). Equipped with CIP clean-in-place.

Technical parameter

Machine pictures

inner look

washing

filling

capping

electrical system

3. The working process

The bottle enters into the rinsing part of three-in-one machine through air conveyor. The gripper installed on the rotary disk catches bottle and turns it over 180 degrees and makes the bottleneck face ground. In the special rinsing area, the nozzle on the gripper sprays juice to rinse bottle inwall. After rinsing and draining, the bottle turns over 180 degrees along the guide rail and make the bottleneck faces sky. Then rinsed bottle is transferred to the filling part through poking bottle starwheel. The bottle that enters into the filler is hold by neck holding plate. The filling valve acted by the cam can realize up and down. It adopts equal pressure filling way. The filling valve opens and begins filling when it moves down and touches thebottleneck, the filling valve move up and leave the bottleneck when it finishes filling, the full bottle is transferred to the capping part through hold neck transition poking wheel. The stop screwing knife holds the bottleneck, keeps bottle upright not rotating. The screw capping head keeps in revolution and autorotation. It can finish a whole capping course including catching, pressing, screwing, discharging through the action of the cam. The full bottle is transferred to bottle outlet conveyor to the next process through starwheel. The whole machine is enclosed with windows, the height of enclosed window is higher than the peak of the 3 in 1 machine, in the bottom of the enclosed window has return air outlet.

about our company

our main production lines:

1. bottling minereal/pure water production line;

2. barrel mineral/ pure water production line

3. bottling carbonated beverage production line (like coca cola);

4. bottling juice production line;

5. canning beverage production line;

6. glass bottle beer production line;

7. milk/tea filling&package line;

8. oil filling&package line;

our two workshops

certificate

Carbonated Soft Drink Filling Machine

CSD Filling Machine

Automatic Carbonated Drink Filling Machine , Soda Filling Machine For PET Bottle Images